Part
Control Board with Overlay (White)
Product Rating
Customer
Lynn from AL
Problem
Gas oven wouldn't light
Tools
Screwdriver
Repair & Advice
Burners worked fine. Oven would light sporadically and when it did it would not stay lit most of the time. Replaced the spark ignitor but did not fix the problem. At this point the oven quit lighting at all. Had suggestions that it was the flame/heat sensor but I didn't think so. Ordered new control board on a Wednesday afternoon, received it Friday and it took this almost 67 year old lady about 10 mins to replace. Oven works like a champ now!
Story submitted on November 18, 2022
Part
Control Board with Overlay (White)
Product Rating
Customer
Vernon from NC
Problem
Oven would not work at all.
Tools
Not sure I didn’t do the work myself.
Repair & Advice
I didn’t do repair but I know I was told it was an easy fix!
Story submitted on November 28, 2020
Part
Control Board with Overlay (White)
Product Rating
Customer
Donald from AR
Problem
Once the oven reached temperature, the burner would no longer ignite to maintain temperature. The temperature sensor working perfectly.
Tools
Phillips screwdriver.
Repair & Advice
I unplugged the range from the wall and took four screws out of the back cover which came off very simply. I unplugged everything from the old board. Two screws held the board in place. The new board fit perfectly. Everything began working correctly.
Story submitted on October 25, 2023