Part
Control Panel (White)
Product Rating
Customer
Christina from AZ
Problem
Washer would not turn on display
Tools
screwdriver
Repair & Advice
Accurate part was received and delivered very quickly.
Story submitted on November 17, 2023
Part
Control Panel (White)
Product Rating
Customer
Janette from IL
Problem
The interface panel not communicating with the control board.
Tools
Ratchet, butterknife. Should have used a standard screwdriver, but the knife did the job!
Repair & Advice
We had to remove 4 screws to release the panel. The butterknife to release the clips holding it down (I suggest using a standard screwdriver). The left clip is a little more difficult to work with, but very doable. Disconnected the wiring harness from the control board. Plugged in the wiring harness from the new interface panel, plugged in the machine to make sure it worked and then pushed it back down on the clips (the left side was a little more difficult) put the screws back in and tada!!!! It was ready to go.
Story submitted on September 3, 2020
Part
Control Panel (White)
Product Rating
Customer
David from IN
Problem
Would not start, threw a f3, the circuit board plate is not protected and get moisture and gums up, shorting out the pins, a person can clean the board but use caution don't over clean it and don't use too much electrical contact cleaner or it is toast
Tools
Screw driver sockets and wrench,
Repair & Advice
Honestly the circuit board needs to be sealed up, keep dirt moisture grime away
Story submitted on November 23, 2021