Part
Door Switch
Product Rating
Customer
Andrew from OH
Problem
Was having an issue with the door switch not recognizing that it was shut.
Tools
Needle nose pliers
Repair & Advice
I just used a pair of needle nose pliers to take out the old one and then fed the new one through the front of the dryer. It fit and works perfectly.
Story submitted on September 13, 2022
Part
Door Switch
Product Rating
Customer
Jason from ID
Problem
Broken door switch prevented dryer from starting.
Tools
Screwdriver.
Repair & Advice
Pull the screws out of the back behind the control panel. It'll slide the top forward so that it unlatches. Disconnect the connector on the old switch, and pull it out through the front. Then put the new switch in, and reverse instructions.
Story submitted on July 10, 2018