Part
Lower Spray Arm
Product Rating
Customer
VINCE from CA
Problem
Dishes on bottom rack would not get cleaned.
Tools
No tools needed.
Repair & Advice
Replaced the lower spray arm and it seems to be working better
Removing and installing the lower spray arm is quite frustrating and takes several minutes.
Story submitted on July 8, 2020
Part
Lower Spray Arm
Product Rating
Customer
Robert from TX
Problem
Not washing well, Lower arm not spinning
Tools
None, but tricky to install. Have to very firmly hold rotating gear and spray arm simultaneously then press down and turn clockwise to install.
Repair & Advice
The lower spray arm seems to be the culprit on this model for most “no longer cleaning well” issues. What can be confusing is that there is also a motor that spins the spray arm partially nit it still seems to rely on water pressure within the arm to spin as well (like most spray arms). Once any part of the seal around any part of the spray arm is breached things do not work properly any more. Install is tricky. The arm rotates on a set of gears. The gears have to be firmly stabilized to I stall the arm. I found it easiest to grab the moving firmly squeezing it up towards the arm, holding everything in one hand, then placing the arm back down onto the fixation point youwill then have to rotate until it slips down into place, and then press down firmly and rote tree clockwise to engage properly.
Story submitted on September 10, 2022
Part
Lower Spray Arm
Product Rating
Customer
Deidre from TX
Problem
Was not cleaning properly.
Tools
None.
Repair & Advice
Saved repair technician time and mark up on part.
Story submitted on April 3, 2023