Part
Rear Drum Felt Seal & Adhesive
Product Rating
Customer
Lydell from KY
Problem
Need to replace dryer drum seal that had deteriorated
Tools
Scrubbing sponge. Acetone nail polish remover. 8 spring clamps.
Repair & Advice
Used nail polish remover to remove old glue residue. Used clamps to hold seal in place before applying glue and then pulled seal off about 1/5 at a time to apply a bead of glue to drum then replaced the seal and moved to next section.
Story submitted on August 18, 2021
Part
Rear Drum Felt Seal & Adhesive
Product Rating
Customer
Robert from TN
Problem
Dryer rear drum felt seal was ripped
Tools
Screw driver, shop vac, cleaner to remove old glue.
Repair & Advice
Pulled the top and front off, removed the belt and drum. Cleaned the whole dryer inside. Removed the old seal and glue. Glued on the new seal and let dry for 24 hours. Reassembled dryer.
Story submitted on October 12, 2021
Part
Rear Drum Felt Seal & Adhesive
Product Rating
Customer
Sun from VA
Problem
Drum seal worn out
Tools
Scraper, latex gloves
Repair & Advice
Use the binder clip or vice grip plier to hold the seal at one spot as you glue small section at a time
Story submitted on January 11, 2019