Broil Element

Broil Element

STEPHEN from NC

Broiler would not work

Screwdriver, flashlight

Before ordering checking element with ohm meter. Unplug stove, remove back panels and access the connections from the back. Registered an open. Replacement element arrived early. Unplug stove and remove back panels again. Disconnect electrical connection. Remove oven racks and remove element by unscrewing mounting screws (back ones first). Recommend a light inside the oven to see. Remove element and set new one in place. Mount to inside oven, reconnect electrical connections, replace back panels. Plug in stove and move into position. Set oven to broil to check. Reset clock. Saved a service call.

Broil Element

Rajko from IL

Old element broke, would not work.

Screwdriver and flashlight

There are videos on the internet that show how to replace the element.