Drain Loop Hose & Check Valve

Drain Loop Hose & Check Valve

Kenneth from IL

Dishwasher would not completely drain following a wash cycle.

Pliers/Flathead screwdriver to remove hose clamps.

The check-valve integral to the drain hose was malfunctioning preventing the cycle from completely draining. When I investigated, the installation was poor -- the installer had disconnected the drain hose from the loop-seal supports on the side and overstretched it to reach the sink drain. I used the new drain hose to remake the loop seal and purchased a 12' extension to reach the sink drain. The only difficulty was routing the extension through the back of the cabinetry as it wanted to kink-up from the loops it had been stored-in.

Drain Loop Hose & Check Valve

Daryl from TX

Leaking hoses

Pliers and 5/16 nut driver

Easy fix removed old hose and installed new hoses fit great and worked perfectly

Drain Loop Hose & Check Valve

Robert from TX

Dishwasher would not drain

Screwdriver

My son who is a plumber installed the parts