Water Level Switch

Water Level Switch

Kevin from SC

Washer was over filling with water and spilling onto the floor.

1/4 inch Nut driver, tywraps to secure tubing attached to the Water level switch.

So it turns out that the part i ordered was not the problem. I replaced the part it did same thing. so i took the tubing that attached to the part off to find a hole had been rubbed into the tube. I repaired the tube and left the new part in since i already opened the part bag i couldn't send it back. So folks before you replace parts like this check out every part of the problem. however Parts Dr was very quick shipping order and parts were as described. I will use them in the future without hesitation. This washer is very easy to work on and anyone not scared to try could use youtube and learn how to save yourself a ton of money.

Water Level Switch

William from CA

Washer kept door locked and ran drain pump continuously. F3E1 error: pressure switch, pressure sensor - water level system error.

Basic tool... gotta have Torx driver to get rear cover off.

14 months ago, we had the similar problem, with the same error codes, and replacing the sensor and cleaning air sensor line, etc fixed it. This time, it did not. No fault of PartsDr.com. Now looking to buy expensive central control unit.

Water Level Switch

Mike from MO

Draining error coming on.

Screwdriver and adjustable wrench.

The replacement water sensor fixed our problem.