Chat with us
Open today 9am-6pm CT
0
Repair Video Available
How to replace Dispenser Actuator on your Whirlpool Refrigerator
Step-by-Step instructions on how to replace the Dispenser Actuator on a Whirlpool refrigerator.
Part
Ice & Water Dispenser Pad
Product Rating
Customer
joe from TX
Problem
My water dispenser push pad was intermittent for a while and finally stopped working.
Tools
Phillips screwdriver, narrow blade common (flat tip) screwdriver, 5/16" nut driver. I actually used a socket with an adaptor to attach to a small rachet driver. I used a small mirror to see the plastic clips that hold the front facade pieces to get access to the push pad (switch). You'll need some privacy so that inocent tender ears won't hear you cussing like sailor.
Repair & Advice
I searched the web and contacted Whirlpool to get either a PDF dissassembly instruction of youtube video but couldn't find one that was similar to my fridge. The facade piece and the controller are held on with plastic latches. I really cannot explain where these are at but look for small square or rectangular holes where a screwdriver can be inserted. Prying up on these should unlatch the clips. I used a small inspection mirror to see where these clip latch to get a better idea on which way to pry, push. this was really the hard part. The rest is just a matter of removing visible screws to pull the water dispenser cavity backing facade out to gain access and replace the switch pad.
Story submitted on August 10, 2021
