Surface Burner Valve (Center)

Surface Burner Valve (Center)

James from PA

Burner knob would not turn - couldn't use the burner.

Screwdriver and metric box wrench.

Needed to repair the center burner on my Kitchen-Aid range. Knob would push in but not turn. Tried troubleshooting a bit with some lubricant as noted on another website, no difference. Took about 15 minutes to swap out the valve with a screwdriver and wrench and now it works great.

Surface Burner Valve (Center)

Donald from MA

One of the stove gas valves no longer turned. The stove is about 20 years old and would cost over $2000.00 to replace.

Phillips screwdriver, open end wrench and adjustable wrench.

Slide the stove out from the wall to access the gas shut off valve and close the valve. Access the stove top burner valves by removing the chrome cover. The chrome cover is held on by a bracket acccessed by opening the oven door. Once the chrome cover is off you can remove the bad gas valve. Overall it’s straightforward but you need decent mechanical appitude. Note you are dealing with gas (danger) so this repair needs to be done correctly with no leaks. I used soap suds to check for gas leaks once I installed the new valve.

Surface Burner Valve (Center)

Frank from MD

Stoves burner valve froze up cannot turn it on

Use the screwdriver and a wrench to replace the valve

Looked the part up on your site order the part got it within a couple days replace the valve. Everything works well even Igot a good price on it. Well, satisfied.