Washplate Impeller

Washplate Impeller

Jerry E from CA

Tub block loosened and caused damage to impeller. Metal plate distorted and caused the washer not to spin.

Ratchet, 7/16 socket, Extension, Phillips screwdriver

Washer wouldn’t spin & made noise when entering wash & spin cycle. Tub block came loose from previous gear box replacement & damaged impeller & metal spacer. Bent metal spacer kept washer from spinning. Made sure followed instructions specifically for installation of tub block. Recalibrated washer using specific instructions sent with part.

Washplate Impeller

paul from NJ

Wash plate was not agitating clothes.

Flatblade screwdriver, ratchet with socket.

Pop off washplate cap with screwdriver, remove bolt holding down washplate.

Washplate Impeller

Melissa from AZ

Washer wasn't cleaning clothes adequately

Pliers, screwdrivers, nut drivers, socket wrenches

Washplate impeller spun freely on gearcase shaft. Splines on the washplate impeller were stripped; gearcase shaft was severely corroded. Replacing washplate impleller was a piece of cake. Replacing gearcase was a chore. I'll relate that separately.