Part
Start Relay & Overload
Product Rating
Customer
Mark from OH
Problem
Whirlpool refrigerator model GX5FHDXVQ01 was making an annoying intermittent clicking noise
Tools
Nut driver with 1/4" socket and screwdriver.
Repair & Advice
Disassembly - Removed the metal panel on the bottom back side of the refrigerator by removing the screws. Removed the old WPW10194431 Start Relay & Overload assembly (located on the side of the compressor) by using the screwdriver to pry it loose from the compressor and pried off the wire connector from the Start Relay & Overload assembly lead. Removed the Run Capacitor off the Start Relay & Overload assembly by simply pulling it off.
Assembly- Plugged the Run Capacitor into the new Start Relay & Overload assembly. Plugged the Start Relay & Overload assembly onto the compressor. Re-attached the power connector to the Start Relay & Overload. Finally, re-attached the metal panel onto the bottom back side of the refrigerator.
Story submitted on April 5, 2022
Part
Start Relay & Overload
Product Rating
Customer
Robert from IN
Problem
No defrost. freezer cold, refrigerator warm.
Tools
Screwdriver.
Repair & Advice
Remove back plate on back of refrigerator, unplug old one, install new one, and reinstall plug, install back plate.
Story submitted on November 10, 2020
Part
Start Relay & Overload
Product Rating
Customer
Danny from IA
Problem
Compressor not running
Tools
Small flat screwdriver
Repair & Advice
Had advice from local repair man and guided me to parts dr. Excellent service and excellent parts and delivery! Thank you
Story submitted on September 8, 2016