Part
Drive Belt
Product Rating
Customer
Jonathon from MO
Problem
Dryer drum wouldn't turn. Needed to replace the idler pully and drive belt.
Tools
Putty knife (to get the lid open), 10-in-1 screwdriver (hex bolts)
Repair & Advice
Ordered a drive belt from another company that claimed it would fit and after 45 minutes of trying to get it on I measured it against old belt I took off. Turns out it was 5/8" too short which explained why I was having such a hard time getting it back on. After that I went to Parts Dr to make sure I got an OEM replacement at a good price.
Story submitted on July 28, 2022
Part
Drive Belt
Product Rating
Customer
Vinh from CA
Problem
My dryer was too noise
Tools
Use screwdriver
Repair & Advice
I use step by step instruction how to replace the parts.
Story submitted on March 5, 2022
Part
Drive Belt
Product Rating
Customer
Michael from IL
Problem
Very noisy while rotating.
Tools
5/16 & 3/8 nut drivers. Flat screwdriver. Phillips.
Repair & Advice
Disassembled dryer due to noise on rotation. Unsnapped top lid, removed door assy, removed front cover screws to remove cover, pulled motor pulley up to remove belt and drum. Replaced all 4 roller wheels and shafts. Replaced motor roller wheel. Reassembled, front drum seal was loose and dryer is still noisy, ordered seal and glue. Try again.
Story submitted on September 11, 2018