Part
Dishrack Roller Assembly
Product Rating
Customer
kirk from MN
Problem
Bottom roller of the top left dishwasher side wall two roller mount broke and the roller wouldn’t stay on.
Tools
Phillips screwdrivers and 3/8 socket
Repair & Advice
Open the dishwasher door, remove the screws that hold the top of the dishwasher to the countertop, pull out the dishwasher approximately 6 inches, pull back the insulation in the area of the roller mount assembly, remove the two screws holding the roller assembly, remove the mount, remove the plastic clip end cap of the top rack rail by squeezing in the clip, slide the new mount on, reattach, move the insulation back into place, push the dishwasher back into place and reattach the screws to the bottom of the countertop.
Story submitted on April 21, 2020
Part
Dishrack Roller Assembly
Product Rating
Customer
Tawnya from AZ
Problem
Wheel broke on dish washer rack
Tools
Wrench
Repair & Advice
Very easy tp repair, pulled out washer, took out screws with wrench. I then took off broke wheel assembly, and replaced with new one. Only struggle was undoing water hose in order to pull out dish washer 6 inches in order to get it external screws.
Story submitted on March 14, 2018
Part
Dishrack Roller Assembly
Product Rating
Customer
John from NY
Problem
Wheel broke off assembly
Tools
Phillips screwdriver
Repair & Advice
I thought I could just snap it in from the inside. I was wrong had to slide the unit out. So I had a disconnect the water feet on the bottom slide the unit out disconnect the old rollers connected the rollers and put it back together. Turned out to be an easy task!!!
Story submitted on July 30, 2022