Screw

Screw

Jon from MI

Pulsator plate in my washer came loose because the grooves in the plate stripped out. A replacement plate was the only way to fix it.

Screwdriver, socket wrench.

I popped the cap off the pulsator plate with a flat head screwdriver, loosened the bolt on the plate, then pulled it out. I put the new plate in the washer (some pressure required) then tightened it down with a socket wrench. I snapped the cap back in place. All done. Very easy.

Screw

Richard from NY

Agitator rattling due to retaining bolt coming loose.

Screwdriver and 10mm socket/extension.

Remove center cap of agitator, 10mm socket/extension to remove and reinstall agitator retaining bolt. Reinstall new cap. All done in 5 minutes.