Part
Water Inlet Valve
Product Rating
Customer
CESAR from OH
Problem
Our washer was just throwing water so I had to get a new pump.
Tools
Screwdriver.
Repair & Advice
Got a good deal on a washer and dryer set and the post said, nothing wrong works great. But it was just dumping water non-stop so did some research and I ended up finding partsdr.com!
Story submitted on January 20, 2021
Part
Water Inlet Valve
Product Rating
Customer
Timothy from KS
Problem
Washer continued to drip water from the near the detergent tray after the wash cycle was complete.
Tools
Screwdrivers and pliers.
Repair & Advice
Read various ideas for reasons why water was dripping after the wash cycle. None of them made sense or worked when tried. One day I decided to turn off the cold water valve after the wash load completed, but it continued to drip. I then turned off the hot water inlet valve and the dripping stopped. So, I knew it was a hot water valve problem and ordered the new part. It wasn't hard to replace (watched a video online) and solved the problem.
Story submitted on December 1, 2020
Part
Water Inlet Valve
Product Rating
Customer
Santos from TX
Problem
NF error code
Tools
Philips screwdriver, flat head screwdriver, plyers
Repair & Advice
I went to the back of the washer took about six screws off of the plastics guard around the inlet valve used a flat head screwdriver to unstick the plastic cover and it pops off then there’s two screw to remove that allows you to move the display forward for more room to remove the inlet valve it has 3 Phillips screws and unhook the color coded connection pull the valve in an angle and it pops off and just reverse the steps
Story submitted on February 28, 2023