Drain Hose Assembly

Drain Hose Assembly

Wonderful from NJ

Washer started leaking and after investigating found the drain hose came out of clips and rubbed a hole in it.

Pliers, screwdriver

Samsung washer does not need to be disassembled, there is an opening underneath where there is easy access to drain hose. Just use some pliers or might even be easy enough to use your hands, and remove hose clamp then slide hose out. Replace hose on back of pump and slide clamp back on. Then pull other end of hose thru the back of machine how it was before. Done . Only takes 10-20 depending on skill.

Drain Hose Assembly

Troy from TX

Leaking hose, bad smell from washer

Screwdriver, needle nose pliers, small box

I watched a video on youtube that made the repair very simple

Drain Hose Assembly

CHARLES from IN

When washer would drain it would leak under washer, hose came out of holders allowing hose to rub allowing a hole to rub into it

Philips screw driver; pliers; light

Took about fifteen minutes to change out hose fit perfect no problems ;