Part
Drain Hose Assembly
Product Rating
Customer
Wonderful from NJ
Problem
Washer started leaking and after investigating found the drain hose came out of clips and rubbed a hole in it.
Tools
Pliers, screwdriver
Repair & Advice
Samsung washer does not need to be disassembled, there is an opening underneath where there is easy access to drain hose. Just use some pliers or might even be easy enough to use your hands, and remove hose clamp then slide hose out. Replace hose on back of pump and slide clamp back on. Then pull other end of hose thru the back of machine how it was before. Done . Only takes 10-20 depending on skill.
Story submitted on November 6, 2019
Part
Drain Hose Assembly
Product Rating
Customer
Troy from TX
Problem
Leaking hose, bad smell from washer
Tools
Screwdriver, needle nose pliers, small box
Repair & Advice
I watched a video on youtube that made the repair very simple
Story submitted on June 2, 2015
Part
Drain Hose Assembly
Product Rating
Customer
CHARLES from IN
Problem
When washer would drain it would leak under washer, hose came out of holders allowing hose to rub allowing a hole to rub into it
Tools
Philips screw driver; pliers; light
Repair & Advice
Took about fifteen minutes to change out hose fit perfect no problems ;
Story submitted on February 3, 2018