Part
Dispenser Cover Assembly
Product Rating
Customer
Walt from VA
Problem
Water was dispensed when Ice or Sparkling Water were requested. Broken tab that triggers micro switch.
Tools
Philips screwdriver, and small flat head screwdriver.
Repair & Advice
I watched a couple of youtube videos on the issue. There is a small tab on the back of each of paddles that trigger micro switches when water or ice are requested. If you push the Ice paddle too far, it can break it's tab. When that happens, ice can't be triggered, so when you push far enough you just get water, no ice. Easy to fix. Four Philips head spreads hold the unit in place. The new unit plugs right in, and same four screws re-secure.
Story submitted on April 7, 2020
Part
Dispenser Cover Assembly
Product Rating
Customer
Michael from NC
Problem
Ice dispenser switch was broken - small plastic tab broken off - bad design by Samsung
Tools
screwdriver
Repair & Advice
Easy to change out - two tabs at back covering the 3rd and 4th screws. Use tiny flat head screwdriver to click them out.
Story submitted on February 7, 2022
Part
Dispenser Cover Assembly
Product Rating
Customer
Tina from NY
Problem
Broken water/ice/carbonated water dispenser.
Tools
Phillips screwdriver and a putty knife.
Repair & Advice
Undid 4 screws, popped of three wire connectors, and inserted new part. Total time 4 minutes.
Story submitted on December 14, 2021