Part
Freezer Door Assembly
Product Rating
Customer
Larry from MO
Problem
Damaged freezer door
Tools
10mm socket, phillips screw driver
Repair & Advice
1. Remove freezer trays
2. Remove (4) 10mm hex screws used to attach door.
3. Remove door from bracket.
4. Remove brackets from old door and transfer them to new door.
5. Remove and reinstall seal in new door.
6. Reinstall door and baskets.
Story submitted on November 14, 2021
Part
Freezer Door Assembly
Product Rating
Customer
Emil from GA
Problem
Movers damaged finish on front of door - dented.
Tools
Right angle ratchet Phillips screwdriver
Phillips screwdriver
Repair & Advice
Hardest part was getting the lower Phillips screws out and in without dismantling the entire freezer assembly.
An angled ratchet Phillips screwdriver and a lot of patience helped accomplish this without having to dismantle the entire freezer door.
Good to go.
Story submitted on October 19, 2023
Part
Freezer Door Assembly
Product Rating
Customer
Cleber from CO
Problem
Dented
Tools
Screwdriver only
Repair & Advice
Super easy to replace take 10 minutes , fitting perfect thanks part dr
Story submitted on February 24, 2023