Y-Clip Assembly

Y-Clip Assembly

Douglas from NH

Ice maker freezing up and dripping water.

Screwdriver, pliers.

Multiple problems with the ice maker but the big one was it would get water in with the ice cubes. I replaced nearly all the parts but honestly I think the fact that mine did not come with these clips may have been the key issue (and cheapest of all the parts). Without these I suspect I was having condensation drip in the wrong place. These are easy to get to (thanks to the GREAT videos on this site!) and I highly recommend checking your ice maker for these and installing if they are not there. The hardest part of the whole process is getting the unit defrosted, don't try to force things if they are frozen. If the unit is fully defrosted this is probably a 30 minute job at most.

Y-Clip Assembly

Dennis from WA

Samsung ice maker overfills and freezes solid.

Phillips screwdriver, blow dryer, and long needle nose pliers

Check You Tube for install video

Y-Clip Assembly

William from OH

Water leaking out of icemaker, ice freezing on parts limiting usefulness

Phillips head Screwdriver, Low heat blower, Pliars

Only trouble came in the beginning when I attempted to set unit to defrost using the video on You tube. Once I discovered there was a difference in the buttons used, found the correct button sequence, installation of the y clips was a breeze. So far, looking very good!