Part
Water Inlet Valve Assembly
Product Rating
Customer
Wes from TX
Problem
After the big snow/freeze we experienced back in February, the water tank on our refrigerator completely froze and busted, leaving us with no water or ice.
Tools
Phillips screwdriver & wire cutters (to trim hoses back).
Repair & Advice
I removed a plastic shroud that covered the water tank and control module. The water tank and control module are connected as one piece. I pulled out retaining clips to remove the water lines that were frozen. I ended up cutting the orange and blue lines to the module since they had frozen water in them. With the new module, I cut the lines back to accommodate the new quick attach couple. I screwed the new tank/module assembly into the door, put the cover back over it and water began to flow. Our ice maker began making ice again, and our water began working on the front outlet.
Story submitted on March 16, 2021
Part
Water Inlet Valve Assembly
Product Rating
Customer
Nghieu from TX
Problem
The reservoir tank is leaking.
Tools
It just needs a screwdriver.
Repair & Advice
Tank and valves located left side bottom of ice maker, first slide a small shelf up then removed a phillip screw on the right then swing to the left to removed the covered. ( Make sure unplug the power and shut off the water before replaced it).
Story submitted on February 25, 2020