Part
Timer
Product Rating
Customer
Anthony from WI
Problem
Not turning on
Tools
Ohm meter screw driver
Repair & Advice
I tested all the fuses and temp sensors all tested good. looked at the wiring diagram and tested the main timer switch and found faults. replaced the timer and all is good
Story submitted on August 9, 2017
Part
Timer
Product Rating
Customer
Thomas from CA
Problem
Intermittent operation.
Tools
Nut driver, pliers.
Repair & Advice
I moved the dryer to provide access to the back cover of the control panel and unplugged the dryer. I removed the back cover of the control panel. I unscrewed the old timer module. I connected the control wires one-by-one to the new timer module, making sure that the wire colors matched with the color code on each connector of the new timer. I screwed the new timer module into the control panel. With the back cover off, keeping clear of the back of the control panel, I carefully plugged the dryer back in and did a quick test of the dryer . I then unplugged the dryer and replaced the back cover of the control panel. I then plugged the dryer back in and pushed it back into its position.
Story submitted on November 29, 2022
Part
Timer
Product Rating
Customer
Rick from CA
Problem
Dryer timer quit working
Tools
Small socket
Repair & Advice
Not much to talk about , except that part ordered about 3pm in California and received next day on porch by 2pm
Story submitted on September 13, 2022