Part
Cycling Thermostat
Product Rating
Customer
Fred from MA
Problem
Heating would not stay at heating temp. Changed thermostat and all is well. Thank you for your support.
Tools
Screw driver,needle nose pliers and a small socket set
Repair & Advice
Unplug unit pry off cover. It's right there on blower.
Story submitted on May 10, 2017
Part
Cycling Thermostat
Product Rating
Customer
Carl from MN
Problem
Dryer would not run.
Tools
1/4 in nut driver, needle nose plier.
Repair & Advice
Having troubleshooting that the thermal fuse was blown, as this fuse is a backup in case the cycling thermostat is defective, I just replaced it as a precaution while I had it torn apart. While replacing this thermostat also check that there is no lint blockage in your fan or ductwork which more than likely requires more disassembly, which isn't a big problem if you have any mechanical knowledge.
Story submitted on January 19, 2023