Part
Pump Accumulator Assembly
Product Rating
Customer
Gary from MA
Problem
Dishes not clean, Accumulator slightly worn by wobbling Feed Tube.
Tools
Pliers, #15 Torx screwdriver.
Repair & Advice
A worn Feed Tube (the lower spray arm spindle/water feed) had worn-out & damaged the Accumulator slightly. Don't forget the Feed Tube Bearing - I think it was never installed. When I replaced the Accumulator I noticed some debris (a few chunks of cardboard) in the sump, so clean it out while you have it apart. Like new now!
Story submitted on September 3, 2016
Part
Pump Accumulator Assembly
Product Rating
Customer
Dennis from IA
Problem
washer screen was boken
Tools
screwdriver
Repair & Advice
easy fix. i just take a picture of it before i start, so I know what it lloks like when it is back together in one piece
Story submitted on January 19, 2023
Part
Pump Accumulator Assembly
Product Rating
Customer
Pak from MA
Problem
Small sand like particles remained on items after washing cycle due to the mesh filter becoming detached over time and letting large food scraps bypass the food grinder.
Tools
Torx bit, (optional wet vac)
Repair & Advice
Very easy job to replace. Cleaned off the grime on the sides of the top rack, the spinner at the top, behind the snorkel, the pro-scrub attachment and the food grinder. Several weeks later and the dishes are still much cleaner than before.
Story submitted on December 27, 2020