Door Lock Latch

Door Lock Latch

Jason from CO

F 26 latch was not showing closed.

Screw driver and torx driver.

Watched youtube and replaced within 10 minutes.

Door Lock Latch

Robert from MA

Latch broken

Screw driver and plieds

Remove spring holding rubber gasket. Remove latch

Door Lock Latch

Minh from NY

Door would not unlock after load was finished.

1/4 socket wrench, t20 torx driver, slim forearms.

First I have to say, shipping time was great. Package arrived a day earlier than expected and I got straight to work. Anticipating a very long and difficult task but was quite simple and quick. First most important step, unplug the washer! I then removed the top cover off the washer. Reached down to where the door latch was and unplugged the wires. Then removed the door latch mechanism with the torx screwdriver. I looked up on YouTube that you're suppose to remove the bellow to access the door latch but I removed it once and it was hard for me to get it back on. So I tried to skip that step and it paid off, that's if you have slim forearms like me to reach down to unplug the wires. So I then removed the mechanism and installed the new one and it was weight off my shoulders to see the washer working properly again.