Part
Control Board
Product Rating
Customer
William from IA
Problem
C01 error code (control board error). Could not reset code at the dishwasher or by cycling power.
Tools
Screwdriver.
Repair & Advice
Part arrived in one day after ordering! Simple replacement. Turn off the power to the dishwasher. Remover all the Philips screws on the inside of the dishwasher door. Keep track of which screw came from which hole as they are different lengths. Unplug the electrical connectors to the control board after snapping it out of the door. Plug in the connectors to the new board and snap in the new board. Replace the screws in the door, turn the power back on and you are finished.
Story submitted on January 5, 2021
Part
Control Board
Product Rating
Customer
tim from GA
Problem
No power to dishwasher
Tools
Screwdriver
Repair & Advice
No power to Frigidaire dishwasher after power surge during storm. Checked breaker to see if it was tripped. It was OK. I took the inner panel off to gain access to the control board. Control board was burnt
Story submitted on August 3, 2018
Part
Control Board
Product Rating
Customer
Dan from MI
Problem
Control would work and not work.
Tools
Phillips screwdriver
Repair & Advice
Very easy repair. YouTube has great instructions.
Story submitted on January 22, 2021
Chat with us
Open Monday 9am-6pm CT
0
