Part
Door Hinge
Product Rating
Customer
James from CA
Problem
According to a repairman the hinges were worn.
Tools
Screwdriver, 2 finishing nails.
Repair & Advice
Finishing nails to keep the hinges from opening during the process. (fit in a small hole on each hinge) Bend them over to keep them in place, Remove the 2 hinge plates and then lift the door out. The hinges are then unscrewed from the door casing. 3 on bottom and top and 3 on each side. Undo the 2 screws that hold the hinge in it's channel. Reverse the procedure until the job is complete. New hinges come with pins in them..DO NOT REMOVE them until the door is installed. Replaced the seals and the oven is good to go.
Story submitted on August 25, 2016
Part
Door Hinge
Product Rating
Customer
matt from WI
Problem
Oven door hinge broken.
Tools
Phillips screwdriver.
Repair & Advice
Very simple. Unscrew the retaining plate, lift off the door. Dismantle the door by removing 6 screws. Remove the 1 screw retaining the door hinge, replace the hinge and reverse the process.
Story submitted on September 3, 2020
Part
Door Hinge
Product Rating
Customer
William from MD
Problem
Squeaky Oven Door Hinges
Tools
Phillips screw driver
Repair & Advice
Easy to replace hinges. Check out video online to learn how to replace.
Story submitted on January 10, 2017