Part
Control Board
Product Rating
Customer
Thomas from PA
Problem
the dishwasher had power but did nothing
Tools
torque and Phillips screwdriver
Repair & Advice
I made sure it had hot water pressure and the power was on, then figured it must be the main board.
Story submitted on June 17, 2022
Part
Control Board
Product Rating
Customer
David from ID
Problem
Lights on controld board flashed and did not respond to anything
Tools
Torx bit screwdriver, Phillips screwdriver
Repair & Advice
I unughed the dishwasher, opened the door took off the door panel. Took off the cover to the control board. I took a few pictures of where the plugs were located. Poped off the plugs and unscrewed the board. I gently screwed the new board down and reversed the above. Plugged it in and no flashing lights it started up and ran perfectly. It nearly took longer to write this than get the door appart.
Story submitted on October 4, 2022
Part
Control Board
Product Rating
Customer
Donald from FL
Problem
Washer was showing Er code.
Tools
Phillips head screw driver
Repair & Advice
Remove front to access pc board.
Story submitted on October 8, 2022