Part
Counterbalance Arm Kit
Product Rating
Customer
Scott from MD
Problem
Kid fell on open door and bent the hinge
Tools
Torx bit
Repair & Advice
Slide dishwasher out and hinges are on either side. Remove with torx bit and replace.
Story submitted on October 9, 2019
Part
Counterbalance Arm Kit
Product Rating
Customer
GINA from MD
Problem
Dishwasher Door Sagging from Fall Onto Door (Found Interior Door Sheetmetal Bent)
Tools
Screwdriver
Repair & Advice
Family member fell onto dishwasher door, causing it to sag. Assumed it was bent counterbalance hinges, however, once I opened the door found that the hingers were not bent, but the sheet metal that the door is framed with was bent; decided to leave it alone, rather than fully disassemble the door. The counterbalance arms (hinges) were the correct perfect match however, the OEM hinges would have to be drilled out they were not bolted or screwed into the frame, once that would be done you could then install the replacement hinges using the bolts supplied.
Story submitted on April 13, 2024
Part
Counterbalance Arm Kit
Product Rating
Customer
Bruce from NY
Problem
The arms were bent and needed to be replaced
Tools
Torq are driver tip
Repair & Advice
It waa a very easy repair. Videos on the web give instructions but it is straight forward
Story submitted on June 18, 2022