Part
Main Control Board
Product Rating
Customer
John from CA
Problem
no start - just three beeps when pressing start
Tools
screw gun and fingers
Repair & Advice
Cleaning lint from blower motor, power was left connected by tech. The door switch was shorted against ground- caused the main PCB to be burned out. Replaced and reassembled. Tested and worked.
Story submitted on April 8, 2023
Part
Main Control Board
Product Rating
Customer
Anita from MI
Problem
7 year old Electrolux dryer would turn on but not start any of the drying cycles.
Tools
Screwdriver
Repair & Advice
After having a repairman tell me it would cost $600 to replace both boards because he couldn't tell which board was bad or to just buy a new dryer instead, I followed the troubleshooting instructions for the Electrolux dryer and the error code indicated the main control board was bad. I ordered it from Parts Dr for $150 and replaced the board myself in less than 30 minutes and saved $450! The key is taking a picture before unconnecting the old board so you know where everything needs to be connected back up with the new board. For now on I will do appliance troubleshooting and see if it's something I can repair myself before calling a repair person. Thank you Parts Dr!
Story submitted on September 8, 2023