Part
LCD Control Board
Product Rating
Customer
Robert from CA
Problem
Dishwasher starting and stopping by itself.
Tools
plyers to turn the rail pins and pull them out
Repair & Advice
Easy repair that fixed the issue completely. Took about 10 minutes. Quarter turn of rail pins of either side of slide fronts, pull out plastic pins. Pull out bottom edge of drawer front and pull it off. Unplug the grounding wire, set aside. slide the drawer top edge piece containing the display board about 1 inch to the left. Pull up to remove. Unsnap the clear plastic piece counting the board from the top edge piece. Unplug the cable from the board. Unsnap the clip on one side of the board and remove the board. Reassemble in reverse order.
Story submitted on February 20, 2022