Telescoping Vent Kit

Telescoping Vent Kit

Kenneth from GA

Dryer vent needed to locate dryer closer to the wall.

Tin snips and screw driver

1) Measured the difference between the wall vent and the dryer exhaustvent 2) Adjusted the vent to approximate the distance between the vent in the wall and the dryer exhaust vent but leaving a half inch extra length in case measurement or angle needed to be adjusted. 3) Attached telescopic vent purchased to dryer exhaust vent with clamp provided 4) Pushed dryer towards wall aligning the telescopic vent to the wall vent. Once aligned pushed closer to wall until telescopic vent inserted to outdoor vent. 5) I may need to get a 3 inch vent extension to insert to wall vent but so far doesn't look needed.