Part
Dryer Repair Kit
Product Rating
Customer
Michael from NY
Problem
Amana dryer Rollers worn and making noise
Tools
5/16 socket, philip’s head screw driver, vacuum
Repair & Advice
The repair was simple and easy, there was a youtube video of the model and common issues and inexpensive too! A one beer job!
Story submitted on December 18, 2019
Part
Dryer Repair Kit
Product Rating
Customer
Michael from IL
Problem
Kenmore Dryer Makes Loud Thumping Noise.
Tools
Nutdriver, Putty Knife.
Repair & Advice
One or both of the drum rollers were worn out and the drum belt was worn, so I bought the kit. There are many good videos available on replacing the drum rollers and belt. I followed the instructions from these videos and the process was very similar. The only difference is that I didn't replace the belt tension pully since it wasn't broken. Our dryer is 20 years old, so I have experience replacing parts, especially in the last couple of years. With that said, it only took me 30 minutes from the time parts were delivered to my door until the dryer was running smoothly. I could've done it a little faster if I would've taken "before" photos to help me re-assemble.
Story submitted on January 14, 2021
Part
Dryer Repair Kit
Product Rating
Customer
Debbie from NJ
Problem
The dryer was noisy due to worn out rollers.
Tools
Screw driver spackle knife.
Repair & Advice
Removed the lint part from the top...popped up the top with spackle knife disconnected the wires...unscrewed the front panel..took off carefully...removed belt from pulley...lifted out the drum...removed rollers...replaced rollers and new belt put belt back on pulley. Put the front panel on.. conected the wires..closed top screwed back on lint piece...oh yes make sure to unplug before fixing and cleaned all the lint on the bottom before putting the drum back on...
Story submitted on December 1, 2020