Shipping Options

View more details in our Shipping Policy

All shipping rate advertisements assume delivery to continental US address, and that the part is in stock and is not oversized.

Shipping rates are per order, not per part!

Standard – $9.99
Estimated arrival
Wednesday Jun 23–28
2nd Day – $24.99
Estimated arrival
Wednesday Jun 23
Next Day – $33.99
Estimated arrival
Tuesday Jun 22
Suspension Kit (4 Pack)
By
This is a new, genuine part manufactured by Fisher & Paykel.
In Stock
$154.47
In Stock
Suspension Kit (4 Pack) 424495P
Suspension Kit (4 Pack) 424495P
Suspension Kit (4 Pack) 424495P
Suspension Kit (4 Pack) 424495P
Suspension Kit (4 Pack) 424495P
Step-by-step instructions on how to replace the suspension rods on a Fisher & Paykel washing machine.

How to replace Fisher & Paykel washer suspension rods

Watch Repair Video

Suspension Kit (4 Pack)

By

This is a new, genuine part manufactured by Fisher & Paykel.
$154.47
  • List Price $169.30
  • Save 9%
Shipping $9.99
Arrives Wed Jun 23–28.

Faster shipping is available at checkout!

Shipping rates are per order, not per part, excluding oversize items.
  • Standard – $9.99
    Arrives Wednesday Jun 23–28
  • 2nd Day – $24.99
    Arrives Wednesday Jun 23
  • Next Day – $33.99
    Arrives Tuesday Jun 22
View our shipping policy
Ships today if you order in the next 4 hours and 5 minutes.
In Stock

Does this fit my model?

Help me find my model number

Part Description

Washer suspension kit.  Package of 4.  Black color.  This is a new GENUINE Fisher & Paykel replacement part.

Part Number

PD00056707

Manufacturer Part

424495P

Manufactured By

Fisher & Paykel OEM Info
Step-by-step instructions on how to replace the suspension rods on a Fisher & Paykel washing machine.

How to replace Fisher & Paykel washer suspension rods

Watch Repair Video

Top Rated Repair Story

Richard from MS

Submitted on Jun. 16, 2020
1 Person Found This Helpful
Product Rating
Problem
Washer not dampening imbalances when in the rinse and spin modes.
Repair Story
Unit would bump and cease spinning during Rinse and Spin cycles due to oscillation dampener failure. Replaced all four d Read More

Part Numbers

This Part PD00056707 (Mfg #424495P) replaces these parts:

Our Competitor’s Part Numbers for this part

  • AP6791036

Compatible Brands

  • Fisher & Paykel

Repair Stories

Sort By Helpfulness |
1
Person Found This Helpful
Part
Suspension Kit (4 Pack)
Product Rating
Customer
Richard from MS
Problem
Washer not dampening imbalances when in the rinse and spin modes.
Tools
Screwdriver
Repair & Advice
Unit would bump and cease spinning during Rinse and Spin cycles due to oscillation dampener failure. Replaced all four dampeners and elastic straps with little problem.
Find this helpful?
Part
Suspension Kit (4 Pack)
Product Rating
Customer
James from ME
Problem
Washing machine kept shutting down due to being out of balance.
Tools
Flat head and Phillips screw driver,pump pliers.
Repair & Advice
Disconnecting water lines from the machine, removing the two cover tabs that hide the two screws then removing the two Phillips screws. Pick up the top part of the washer and push it backward and secure. Disconnect the rubber alignment bands then remove tension rods by picking up on them and removing do one at a time. Replacing with new rod in the same fashion. Reassemble.
Find this helpful?
Part
Suspension Kit (4 Pack)
Product Rating
Customer
Andrew from FL
Problem
Banging during spin cycle.
Tools
Screw driver, yard stick.
Repair & Advice
Suspension struts were replaced easily. Remove and replace each, one by one. I used a yard stick to push the plastic bushing out of the slot on the botom mount for each strut once I had the top corner mount off. It was the right length and thickness. Be careful with exposed sharp edges of the washer's metal body. Take note of back right corner and how the wires and tube feed through the corner strut mount - it was tight getting that one in, but doable. I put some duck tape over the metal in that cover so it wouldn't risk cutting through the wire or tubing as I worker that corner. I was so excited to have these replaced and be able to run my washer without any banging during the spin cycle. Truly saved me from an expensive replacement for an otherwise working washer.

Model Cross Reference

This part PD00056707 (Mfg #424495P) works with all models listed.

Does this fit my model?

Help me find my model number
Manufacturer Appliance Model Description
Fisher & Paykel WL26CW2 Washer
Fisher & Paykel WL26CW2-96114A Washer
Fisher & Paykel WL37T26DW2-96113A Washer
Fisher & Paykel WL37T26KW2-96104A Washer
Fisher & Paykel WL42T26DW1-96178A Washer
Fisher & Paykel WL42T26DW1-96178B Washer
Fisher & Paykel WL42T26DW1-96198A Washer
Fisher & Paykel WL42T26KW1-96174A Washer

Locate Model Number

Choose your appliance type