Part
High Limit Thermostat
Product Rating
Customer
Sally from FL
Problem
Dryer not heating
Tools
Screwdriver
Repair & Advice
My dryer was not heating and the internet suggested replacing the fuse and the thermostat. The parts came in one day and they were exactly what was needed. My husband popped off the back of the dryer and the parts were very easy to replace. Much cheaper and quicker than calling a repair service. Thanks so much Parts Dr.
Story submitted on May 19, 2022
Part
High Limit Thermostat
Product Rating
Customer
Robert from PA
Problem
Dryer would run through the cycle and I had just put a new heating element in, but still would not dry the clothes
Tools
Nutdriver and needlenose pliers
Repair & Advice
Very simple to change out, after diagnosing with my meter. Removed the back of the dryer after unplugging the dryer. Removed the three wires to the element and thermostat,then removed the heating element and removed the thermostat from the heating element and installed the new one. Put the back of the dryer back on, hooked the vent hose back to the dryer, plugged it back in, and put it on cycle and then there was great. Family is happy and back to drying clothes here instead of the laundromat.
Story submitted on September 12, 2019
Part
High Limit Thermostat
Product Rating
Customer
GREG from WA
Problem
NO HEAT IN DRYER.
Tools
NUT DRIVER.
Repair & Advice
USED OHM METER TO CHECK FOT OPENS IN ALL HEAT LIMIT PARTS, THIS WAS OPEN.
Story submitted on May 23, 2023
Chat with us
Open tomorrow 9am-6pm CT
0
Repair Video Available
