Part
Lid Switch Assembly
Product Rating
Customer
Danny from TX
Problem
Washer was not going into spin and not pumping water down.
Tools
1/4" nut driver, Philips screwdriver, needle nose pliers
Repair & Advice
Washer was not spin or pumping water down. From recent experience, I check the lid switch and it was falling apart. Used screwdriver to activate the switch and drain the water. Removed the back of the washer and leaned the outer shell over to access lid switch to make replacement. Reassembled washer. Machine spun and pumped down the water on test run.
Story submitted on October 18, 2015
Part
Lid Switch Assembly
Product Rating
Customer
Debbie from MO
Problem
Filled with water and just sat there!
Tools
Screwdriver
Repair & Advice
Had the new lid switch on in no time! Unfortunately I then discovered my motor coupling was bad and replaced it also. 10 minute job. Tip: Make a jump wire from your old lid switch harness to access other parts that need repair.
Story submitted on March 7, 2017
Part
Lid Switch Assembly
Product Rating
Customer
David from AR
Problem
Washer would not work.
Tools
Screwdriver.
Repair & Advice
After having this problem in the past, I pretty much knew what to look for.
Story submitted on November 8, 2023