Agitator Base

Agitator Base

Sam from IN

People overloaded the washer. Agitator was no longer turning. The spline connection was stripped out. .

One socket and extension.

Was an easy repair, quality part. Perfect fit.

Agitator Base

Paul from TX

Agitator base not working due to stripped threads.

Socket wrench

Very easily repair related to removal of center bolt, replaced the agitator base, and screwed back in the bolt.

Agitator Base

robert from LA

Agitator base spline was worn out.

Socket wrench and pliers were all that was needed to change out part.

I had to remove the top cap to the agitator then remove the inner cap that covers the agitator dogs and main bolt while using a 10mm socket with a 10inch extinction while holding the washer drum with one hand to keep the drum from turning while unbolting the agitator once the bolt is removed just pull up agitator inspect the dogs and other parts while the agitator is out and replace any if needed reassembled place agitator base and upper unit back into main shaft spline bolt unit back in place put the inner cap back and top cap on the job is done.