Part
Oven Control Board
Product Rating
Customer
joseph from FL
Problem
Mounts broke, unit shorted, error message. Reset breaker, error remained.
Tools
Angle socket, socket
Repair & Advice
Pulled oven out only 2 inches, used angle socket to reach rear screws. Take a picture of old unit before removing any wiring. Pulling off overlay ripped a corner from it. Lined them back on the new controller which appears as a crack in the corner. So go slow removing it just spend the extra and order the overlay. Dropped a screw or two behind oven trying to line up holes of cover to base. Overnight shipping worth it. Ordered Friday. Delayed Saturday because heavy rain. Arrived Sunday. Not to bad.
Story submitted on December 15, 2018
Part
Oven Control Board
Product Rating
Customer
Allan from GA
Problem
All oven functions had ceased, clock display was out
Tools
Screwdriver
Repair & Advice
Replacement was very simple, 4 screws to remove back cover, 4 screws to remove dead control board. I highly recommend labeling the five blade- connected wires. Unplug wires, unplug white connector, then reverse the process to hook up the new control
Story submitted on April 7, 2023
Part
Oven Control Board
Product Rating
Customer
Karla from OH
Problem
Error code F13.
Tools
Screwdriver.
Repair & Advice
Stove was unplugged And moved to put down new floor. 3days later put back in place, plugged in and got error code. Flipped breaker off counted to 60, flipped back, still had error code. Repeated process, no luck. Ordered this control board. Can quick worked perfectly!
Story submitted on August 11, 2020