Oven Bottom Panel

Oven Bottom Panel

James from OH

Aluminum foil melted to the ovens bottom pan

1/4 inch socket driver

Very simple, just remove 2 screws from back left and right corners, be sure to remove screws by turning in and out, back and forth a little each direction as the screws seem tight. If you don't use the back and forth method, you will break them off in the holding clip and have to remove clip to take the rest of the screw out and replace with a new screw! Then just push down on the front edge of pan to release the rear to raise up and lift out!

Oven Bottom Panel

Darlene from FL

Foil melted on the bottom pan and was etched in

Order a new pan thru parts dr at a much better price than anywhere else.

Simple to install (me a female) although it was a bit tough to remove the screws from the old pan. Part came quick and very easy to order!!

Oven Bottom Panel

RONALD from WI

Aluminum foil baked to bottom pan, my time is worth more than the time spent using chemical A, B, or C to remove it...or spend <$100 for a replacement pan.

Screwdriver or socket wrench

Remove two screws, remove the pan. Replace. Very easy. Happy wife again!