Part
Bake Oven Igniter
Product Rating
Customer
Willis from NJ
Problem
Stove igniter glowed, but oven would not light.
Tools
Screwdrivers.
Repair & Advice
I looked on the internet to see how to do this repair and found several videos. As directed, after unplugging the stove, I removed bottom panels in oven to access the igniter and remove the screws that attached it. It took me a few minutes to realize that on this stove I had to remove the bottom drawer to unplug the igniter (the plug was not accessible from the back, which flummoxed me at first, because that's what the internet videos showed). I unplugged the igniter, screwed in the new igniter, plugged it in from underneath, and replaced the bottom panels. (My spatial relations are not good, so I photographed each piece before an after I removed it, which made it easy to put it back together.) I plugged in the stove, turned on the over, and it worked fine. NOTE: I saw cheaper igniters, but they were not the exact part for my stove, and would have required a bit of wiring instead of plug n' play. For me, the cost was worth it.
Story submitted on July 23, 2020
Part
Bake Oven Igniter
Product Rating
Customer
Edward from VT
Problem
Oven burner would not light due to igniter not getting hot enough
Tools
Screwdriver and flashlight
Repair & Advice
Removed racks 2 bottom pans. Unscrewed igniter bracket and removed igniter with bracket attached Had to remove bottom warming draw to remove and unplug wire harness. Given the make and model # of the oven I was repairing it would have been great to have had a short replacement instruction. Spent a little time trying to figure out how to find,unplug and remove igniter and bracket. Out side of that reinstalled igniter and bracket , pans and racks turned on and it works like a charm. So the moral to the story is give a little short instruction as to what to look for as I know there are many appliances out there with different avenues to get there.
Story submitted on January 25, 2022
Part
Bake Oven Igniter
Product Rating
Customer
Ronald from MS
Problem
Oven would not light
Tools
Nut driver
Repair & Advice
Watched a couple of YouTube videos ,very easy part exchange
Story submitted on July 8, 2021