Oven Control Board

Oven Control Board

Eugene from NC

Oven heating elements all went out. Prior to that, the oven would no heat properly and would trip fuse box

Phillips screwdriver mainly and flathead for clips

I have a 2016 frigidaire gallery double wall over. After experiencing intermittent oven problem that cause my bake element to blow twice, the oven control board relay finally blew. It was the best thing to have happened because I knew the problem was the board but no one could validate it at the time. I jumped on Partsdr.com and easily looked up my oven model and found the exact board at a very reasonable price. Shipping took 2 days. Part looked brand new as described Shut oven off at fuse box I'm no appliance tech but it was oy 3 screws to take off the oven control panel and there is was the oven control board. I took off the 3 mounting screw and popped 2 clips to free the board, then just removed wire harnesses. In under 30 minutes I had plugged back in and working. Tested the oven and for the first time in over a year, my oven performed flawless tested temp increase and drops with no issue. Upon shaking the old board, I could hear rattles as if the relay pieces were broken.

Oven Control Board

Tracye from LA

Would not power on. Did not have display. Electrical to oven checked out good.

Screwdriver

Actually called repairman for diagnosis and repair. He Advised the part number needed. He was not available when the part came in. My husband was there when he made diagnosis and helped take unit out (Double oven), so he took plenty of pictures and changed the part himself. Currently working great. Product was received in promised timeframe, well packaged and as described

Oven Control Board

Tracye from LA

Would not power on. Did not have display. Electrical to oven checked out good.

Screwdriver

Actually called repairman for diagnosis and repair. He Advised the part number needed. He was not available when the part came in. My husband was there when he made diagnosis and helped take unit out (Double oven), so he took plenty of pictures and changed the part himself. Currently working great.