Bake Element

Bake Element

Francis from MT

Oven heating element went out.

Allen wrench, pliers.

I am an older woman and I looked online how to replace an element. I ordered the replacement. It came quickly within a week and it was easy to replace and my oven works again!

Bake Element

Thomas from IN

Oven would not work (baking element just wore out).

Simple Phillips head screwdriver, clamps, bake oven replacement part.

Pull the oven from the wall. Unplug and be careful to grip at the base and not with the cord. Use the opportunity to clean the mess that is left on the floor. Also, vacuum the oven if/once it is cool. Remove the baking element that went bad by unscrewing them at the back of the oven. Be mindful that the element is connected to wiring by a flat connector on each side. I would get two clamps to keep the wiring from slipping behind the bake oven and go into the compartment behind the oven. That's OK but would require more work to thread those individual wires back into the slots. The replacement part fits the same as the original. Once the connections are back on, re-screw it back in.

Bake Element

Suzanne from RI

Bake oven coil cracked.

Screwdriver & nut loosener.

It was so easy to replace .first I youtubed but then the salesman I talked to via the phone @ Partsdr gave me an even easier way to change it out which . Thankful to talk with him because I did not need to move my stove !