Part
Agitator Cam Roller (Set of 4)
Product Rating
Customer
Bruce from OR
Problem
Agitator would just spin freely
Tools
7/16" socket, 3/8 drive ratchet & extensions & cellophane tape.
Repair & Advice
Washer wasn't agitating clothing, remove cap from agitator & internal seal. Then loosen bolt & remove assembly. Agitator is two pieces with the rollers between them. I used cellophane tape to hold the rollers in place during reassembly & had a tail sticking out to remove it with when finished.
Story submitted on April 7, 2021
Part
Agitator Cam Roller (Set of 4)
Product Rating
Customer
Frank from MD
Problem
Keep getting UL error.
Tools
Putty knife.
Repair & Advice
The load was unbalanced and kept shutting washer down. I had purchased aftermarket parts previously and installed. After several loads, the error returned. Purchased from Parts Dr and 12-year-old machine running like new.
Story submitted on June 2, 2020
Part
Agitator Cam Roller (Set of 4)
Product Rating
Customer
Frank from MD
Problem
Banging out of balance load.
Tools
Putty knife.
Repair & Advice
Had previously installed aftermarket parts lasted only a couple loads before returning. Will not use aftermarket again. Thank you
Story submitted on June 2, 2020