Part
Temperature Control Thermostat
Product Rating
Customer
Tom from NJ
Problem
Refrigerator too cold
Tools
Nut driver
Repair & Advice
Removed cover disconnected the part and replaced it with the new part
Story submitted on March 16, 2018
Part
Temperature Control Thermostat
Product Rating
Customer
Mike from TX
Problem
Refrigerator side was freezing
Tools
Nut driver, flat head screwdriver, needle nose pliers
Repair & Advice
The overall procedure for replacing thermostat is simple. The most difficult part is removing the Styrofoam around the damper because it is glued on. You have to remove it in order to wrap the thermocouple around the damper.
Story submitted on October 12, 2017
Part
Temperature Control Thermostat
Product Rating
Customer
James from PA
Problem
Side by side refrigerator section was freezing.
Tools
Screw driver handle with 1/4 size bolt head and needle nose pliers.
Repair & Advice
Review youtube video on refrigerator for tips on install. More difficult than expected as shown in the video. There was an extra screw to remove for the upper housing removal. The end of the temperature sensor had to be pushed through a sleeve and then coiled around the airflow section in the housing.
Story submitted on December 29, 2020