Part
Thermistor
Product Rating
Customer
DJ from TX
Problem
Ice maker would not stop making ice.
Tools
Socket and ratchet wrench.
Repair & Advice
Removed the two screws holding on the front cover and then removed screw on the right side of the ice cutter so that I could remove the wire for the thermistor. Removed the holder for the thermistor and then reversed all of the steps. Took less than 10 minutes and now it is working perfectly.
Story submitted on February 2, 2021
Part
Thermistor
Product Rating
Customer
Roy from TX
Problem
KitchenAid Ice Maker was overfilling the bin
Tools
Screwdriver
Repair & Advice
I pulled down the service manual for my KitchenAid under the counter ice maker and determined this bin Thermistor was the most likely culprit of the ice maker over filling the bin. After replacing the thermistor which took about 15 minutes the problem was solved.
Story submitted on August 10, 2021
Part
Thermistor
Product Rating
Customer
AJ from AR
Problem
Over making ice
Tools
1/4 socket
Repair & Advice
It has a plug so it’s very easy to repair.
Story submitted on October 17, 2023