Part
Light Bulb (10W)
Product Rating
Customer
Michelle from AL
Problem
Light bulb was blown
Tools
Phillips head screwdriver
Repair & Advice
Simple fix- removed light cover by unscrewing the one screw. Unscrew blown lightbulb. Replace with new light bulb then place the cover back on and screw into place
Story submitted on March 15, 2019
Part
Light Bulb (10W)
Product Rating
Customer
Ernesto from CA
Problem
Burnt light bulb.
Tools
None
Repair & Advice
Remove lens using Philips screwdriver. Unscrew bad light bulb by twisting it counterclockwise. Install replacement light bulb. Replace lens and tighten the screw with Philips screwdriver.
Story submitted on January 26, 2019
Part
Light Bulb (10W)
Product Rating
Customer
Chee from WI
Problem
Whirlpool dryer light bulb dead.
Tools
Screwdriver.
Repair & Advice
Once the unit was taken apart, easy twist off and replace. This could have been done from inside the tumbler with 2 screws but since the unit was taken apart, replaced as it was dead. For a light bulb only, it was rather expensive.
Story submitted on July 10, 2019