Part
5 Point Spark Module
Product Rating
Customer
Jeff from TX
Problem
Gas stove re-ignition module was not sparking.
Tools
Star/torx head screwdriver and Phillips head screwdriver.
Repair & Advice
Replacement was made on a DCS gas cooktop. Removed knobs by wedging towel in behind them, wrapping, and then pulling. Removed the star head screws and then with the help of a second person had the panel held onto while making the replacement.
Unplugged internal power source and then removed the wires from the old module one at a time and added them to the new one. Put everything back together in reverse order. Whole process took about 20 minutes - the hardest part was getting the old module off and wires removed from it as it was positioned in an awkward location.
Story submitted on December 28, 2021
Part
5 Point Spark Module
Product Rating
Customer
James from CA
Problem
DCS stove had no spark
Tools
Screwdriver
Repair & Advice
Removed knobs and faceplate. Unscrewed metal piece in front of spark module and unscrewed module. Removed wires from old module and transferred to new module. Reassembled in reverse order.
Story submitted on July 2, 2021
Chat with us
Open tomorrow 9am-6pm CT
0
