Part
Drain Pump Kit
Product Rating
Customer
Mark from TX
Problem
Water drain pump stopped working in KitchenAid under counter ice maker
Tools
Ratched, screw drivers
Repair & Advice
Very simple to remove old pump and replace with new one. Ice maker works like new!
Story submitted on May 11, 2016
Part
Drain Pump Kit
Product Rating
Customer
Steven from IL
Problem
New stand-alone ice maker, wanted to add drain pump.
Tools
1/4" nut driver, 1/4" impact driver, razor knife, two small adjustable wrenches.
Repair & Advice
When installing the large white flex drain line (from pump to wall drain), be sure to use the correct end on the pump side. "Pump Side" is embossed, but small and not the easiest to see. The reason is you have to trim the rubber and one side is thicker than the other, the thinner side will not seal around the drain nipple very well.
Story submitted on April 22, 2021
Part
Drain Pump Kit
Product Rating
Customer
Mike from FL
Problem
Needed new drain pump for Kitchenaid ice machine.
Tools
Screwdriver and socket driver.
Repair & Advice
Very easily replaced. Instructions and online videos are available also. Took 15 min total time.
Story submitted on September 23, 2020