Part
Water Supply Feed Tube
Product Rating
Customer
Mark from LA
Problem
Hole developed.
Tools
Screwdriver.
Repair & Advice
Very easy installation. Just needed a screwdriver to install the hose clamp and two screws holding the tube down.
Story submitted on January 11, 2024
Part
Water Supply Feed Tube
Product Rating
Customer
Steven from MO
Problem
Dishwasher would leak water when ran. I found the reducer/ connector was brittle and cracked
Tools
Phillips head screwdriver and 1/4 nut driver
Repair & Advice
I pulled the dishwasher out and loosened the hose clamp on the bottom by the drain motor. I opened the door and unscrewed (by hand) a plastic nut holding the spray arm on the roof of the inside of the tub and remover the upper spray arm assembly. I then unscrewed 1- 1/4 nut from the back where the feed attached to the back of the dishwasher and gently pulled it loose and the whole assembly came off with no issues. I put the new one on and screwed everything back on
Story submitted on November 15, 2023